Shaun Murray and Greg Nelson agree that a solid foundation greatly increases a rider’s learning curve. Hyperlite’s Baseline is shaped specifically for creating that base and solid foundation. The Baseline has a wider overall profile built atop a Continuous Rocker, delivering a smooth carving board that gets more pop off the wake due to its increased surface area. The Variable Edge Design is forgiving between the inserts but then sharpens towards the tip and tail to provide the strong edge hold necessary for generating speed into the wake. The Baseline is simple and both Murray and Nelson believe that “Less is More” in their shared shaping philosophy. The center of the base is clean, clean water flow creates a smooth ride and softer landings, the dual tunnels easily allow water to enter and exit at the Baseline’s tip and tail. Take it from two legends, the Baseline is the board for your wakeboard adventure.
The rocker line that started it all. Speed and fluid, predictable pop truly define this rocker. Designed to carry great speed into the wake with minimal drag, a Continuous rocker generates a longer trajectory with similar pop every time.
Integrating the top and bottom fiberglass layers into one. Generating a more durable board on side impacts to prevent delamination.
HL fiberglass is available in 3 weights depending on the board. Over time, traditional woven glass fibers will separate. With layered glass every Hyperlite deck will have the same pop off the double up year after year.
BIOLITE 3 CORE
The secret recipe HL has been perfecting since day one. This core material is the gold standard in the industry and used throughout the HL line. Biolite 3 is the lightest and most durable formula to date.
VARIABLE EDGE DESIGN
Edge shapes that differ from tip to tail, most commonly shifting to sharper edges near tip & tail from a more forgiving, rounded or beveled shape under stance.
DUAL FIN POSITIONING
Fins closer to the tail provide more edge hold and the forward fin position delivers a looser feel.
Delivers a more secure fit of the bolts to the inserts, improving bolt retention keeping binding hardware locked down.
NELSON - MURRAY COLAB
Two wake artists, Legends & HOF inductees designing a wakeboard for all ability levels, Shaun Murray and Greg Nelson.
MINIMUM SWING WEIGHT PROFILE
Thinning of the tip/tail profile for an effortless feel while spinning flat and during inverts.
131cm fits riders 120lbs+
136cm fits riders 140lbs+
141cm fits riders 160lbs+
The Session Binding offers wakeboarders more adjustability with the open toe design. The upper ankle Velcro closure delivers that support riders crave and two lace zones means you customize the feel and support to your liking. Ideal for sharing or tailoring to meet individual needs, the Session Binding is the key to your season. Mount this binding to any Wakeboard, preferably an awesome Hyperlite, with the 6” Universal Mounting System.
EASY ON FIT
Binding opens wide easing entry to begin your session.
SUPPORT LEVEL - MID
Material selection engineering to offer a softer more flexible feel.
Adjustable toe design & floating tongue offer different shoe sizes a secure fit. Share your Bindings and #PassTheHandle.
LOW PRO PLATE SYSTEM
The Low Pro Plate system takes much of what HL learned from the System binding and incorporates it into a more traditional design. HL began by reducing the overall volume by nearly 16%, which translates into a much lighter boot. The drop-through footbed keeps a rider closer to the deck for maximum control and response. To ensure the baseless design did not produce unwanted plate twist HL connected the sidewalls to the chassis, creating a stronger foundation.
RANGE OF MOTION - MAX
Designed for those seeking a softer more flexible boot - tweaking to the Max.
ALUMINUM MOUNTING SYSTEM
Reinforced stability plates with a raised teeth interlocking design reducing heel lift solidifying your connection.
VELCRO CLOSURE - ANKLE
Easy to customize beefy Velcro security for upper ankle.
UNIVERSAL 6" MOUNTING SPREAD
Industry standard insert pattern - Mates with every wakeboard on the market today.
MOLDED EVA FOOTBED
Ergonomically molded EVA provides comfort and support for ability levels, impact protection and arch support included on all Hyperlite footbeds.
Pivot point allowing lower foot & upper ankle sections to flex independently.
LACE CLOSURE - DUAL
Upper and lower lace closures provide adjustability & customization.